Last-mile delivery: how courier and parcel companies run it well
The last mile is the leg from the delivery station to the customer's door, and it is usually the most expensive and most visible part of the whole chain. For a courier or parcel company, profit often comes down to how packages are sorted at the hub, how they are split across vans and what happens when a delivery cannot be completed.
Why the last mile is hard
In linehaul, one truck moves a lot of volume between two points. The last mile is the opposite: many small packages, each with its own address, time window and a recipient who may not be home. City traffic, incomplete addresses, gated buildings and last-minute changes all add time to every stop.
That is why the last mile is won through discipline: knowing exactly what is in the hub, putting every package on the right vehicle and measuring what happens on the street.
Hub scan-in and sortation
It starts with scanning every package as it enters the hub. That scan confirms arrival, timestamps it and makes the package available to assign. Without a reliable inbound scan, 'lost' packages are usually sitting in a corner of the building.
Next comes sortation: separating packages by delivery zone. Small operations sort by hand into shelves or cages; larger ones use conveyors and scanners. Either way the rule is the same: every package must be tied to a zone before the vans are loaded.
Allocating by zone and capacity
Splitting your service area into stable delivery zones lets each driver learn their patch, its shortcuts and its regular customers. Zone is the first allocation rule; capacity is the second.
Every vehicle has a cube and weight limit, and every driver has an hours limit. Allocate by zone alone and one van leaves overloaded while another goes out half empty. A good daily plan balances zone, vehicle capacity and available hours, and leaves room for pickups or urgent deliveries.
Route density
Route density is how many stops a vehicle makes per mile or per hour. The closer the stops, the more deliveries per shift and the lower the cost per package. Grouping deliveries on the same street or building, sequencing stops logically and avoiding needless trips across town has more impact than almost any other change.
Density is also a commercial decision. Serving outlying areas can be profitable if those deliveries are grouped on fixed days, and costly if they run daily with only a few stops.
Failed deliveries
A failed delivery costs the outbound trip, handling back at the hub and a second attempt. The usual causes are well known: recipient not home, wrong or incomplete address, no access, refused package or cash on delivery not available.
Always record a standard reason code rather than a free-text note. Codes reveal patterns: a shipper sending bad addresses, a zone with access problems or a time window that does not work. Every failure should end with a new delivery date or a clear return instruction.
Proof of delivery
Proof of delivery (POD) is evidence that the package arrived. The most common forms are the recipient's signature, the name of the person who received it, one or more photos of the delivered package and the location where the delivery was recorded.
Good POD settles disputes in minutes instead of days. Because mobile coverage is not always reliable, the driver app needs to capture POD offline and upload it when signal returns.
Customer notifications
Many customer service calls are simply 'where is my package?'. Notifying automatically when a package is out for delivery, delivered or when an attempt fails cuts those calls and makes it more likely someone is there to receive it. The best channel depends on the market, but the principle holds: tell customers before they have to ask.
Measuring cost per drop
The most useful last-mile metric is cost per successful delivery: the total cost of a route (driver, vehicle, fuel and tolls) divided by completed deliveries. Measuring against successful drops rather than packages loaded makes the true cost of failures visible.
Alongside it, track first-attempt delivery rate, stops per hour and the share of each vehicle's capacity actually used. With those four numbers by zone and by driver, you can make almost every important decision.
Questions, answered
What is last-mile delivery?
It is the final leg of delivery, from the hub or delivery station to the recipient's home or business.
How do you calculate cost per drop?
Divide the total cost of the route (driver, vehicle, fuel and tolls) by the number of successfully completed deliveries.
What does proof of delivery include?
Typically a signature or the name of the person receiving, photos of the delivered package and the location and time it was recorded.
How can couriers reduce failed deliveries?
Validate addresses before dispatch, notify recipients when the package is on its way and record a standard reason for every failure so the root causes can be fixed.
Why allocate by zone instead of just proximity?
Stable zones let drivers learn their area and make it easier to balance load across vehicles by capacity and hours.