Chargeable weight: how to calculate it for air, truck, LCL and parcel

Updated October 14, 2026 · 5 min read

Almost no carrier charges on actual weight alone. A large, light box takes up space that heavier freight could use, so carriers compare the actual weight with a weight calculated from volume, called dimensional or volumetric weight, and bill whichever is greater. That figure is the chargeable weight. The conversion factor depends on the mode and the carrier. This guide covers the factors most often used for air, truck, LCL ocean and parcel, in metric and in US units, with worked examples.

The general rule

Measure the length, width and height of each piece at its outermost points, including the pallet if there is one. Work out the volume, convert it to dimensional weight using the mode's factor and compare it with the actual gross weight. The chargeable weight is the greater of the two.

For shipments with several pieces, the usual practice is to total the volume and weight of all pieces and compare the totals. Some parcel carriers calculate piece by piece, so check their service terms.

Air freight: 1:6000, or 167 kg per cubic meter

For international air cargo the IATA standard is 6,000 cubic centimeters per kilogram: divide the volume in cm³ by 6,000. Put another way, one cubic meter equals 166.67 kg, usually rounded to 167 kg per cbm. Chargeable weight is normally rounded up to the next half kilogram.

Example 1: a pallet measuring 120 x 80 x 100 cm and weighing 95 kg. Volume: 120 x 80 x 100 = 960,000 cm³. Dimensional weight: 960,000 / 6,000 = 160 kg. Since 160 is greater than 95, the chargeable weight is 160 kg.

Example 2: three cartons of 60 x 40 x 50 cm at 30 kg each. Volume per carton: 120,000 cm³; total 360,000 cm³. Dimensional weight: 360,000 / 6,000 = 60 kg. Actual weight: 90 kg. Actual weight wins, so the chargeable weight is 90 kg.

In US units, the same factor is roughly 166 cubic inches per pound. Example: a 48 x 40 x 40 in pallet weighing 350 lb has a volume of 76,800 in³. Dimensional weight: 76,800 / 166 = 462.7, so about 463 lb, which is the chargeable weight.

Trucking: 1:3000 is common, but it varies

There is no single standard for LTL or groupage trucking. A widely used factor is 3,000 cm³ per kg, about 333 kg per cubic meter, but carriers and countries apply different factors. In the US, LTL freight is usually rated by freight class, which depends heavily on density, and many carriers now price on density or on linear feet of trailer space. Full truckloads are generally priced per load. Always confirm the basis in the carrier's tariff.

Example with 1:3000: a pallet of 120 x 100 x 150 cm weighing 400 kg. Volume: 1,800,000 cm³ (1.8 cbm). Dimensional weight: 1,800,000 / 3,000 = 600 kg. The chargeable weight is 600 kg.

LCL ocean: W/M, 1 cbm = 1,000 kg

LCL is charged per W/M, weight or measure: one cubic meter is treated as one metric ton, and you pay on whichever figure is greater. Tariffs usually carry a 1 W/M minimum.

Example 1: 4.5 cbm and 2,800 kg. Metric tons: 2.8. Cubic meters: 4.5. You pay for 4.5 W/M; at USD 60 per W/M, freight is USD 270.

Example 2: 2.0 cbm and 3,500 kg. Metric tons: 3.5. You pay for 3.5 W/M; at USD 60 per W/M, freight is USD 210.

Parcel and courier: the 5000 and 139 divisors

International express and parcel carriers commonly use 5,000 cm³ per kg, which equals 200 kg per cubic meter, though some services use 6,000. Rounding is set by each carrier, often to the next half kilogram or whole kilogram.

Metric example: a 40 x 30 x 30 cm box weighing 4 kg. Volume: 36,000 cm³. Dimensional weight: 36,000 / 5,000 = 7.2 kg, billed at 7.2 kg rounded under the carrier's rules (for example 7.5 kg).

In the US, the major parcel carriers commonly use a divisor of 139 cubic inches per pound for standard rates, which is roughly equivalent to 5,000 cm³ per kg. A divisor of 166, roughly equivalent to the IATA 6,000 factor, is used in air freight and by some postal services, which may apply dimensional weight only to packages over one cubic foot. These rules change, so check the current service guide.

US example: a 16 x 12 x 12 in box weighing 10 lb. Volume: 2,304 in³. With the 139 divisor: 2,304 / 139 = 16.58, which rounds up to 17 lb. The chargeable weight is 17 lb.

Questions, answered

What is the difference between dimensional weight and chargeable weight?

Dimensional weight is calculated from volume. Chargeable weight is what you are billed on: the greater of actual weight and dimensional weight.

Why does air freight use 6,000 and parcel use 5,000?

They are commercial conventions. IATA sets 6,000 cm³ per kg for air cargo, while many parcel carriers use 5,000, which produces a higher dimensional weight for the same box.

How many kilograms is one cubic meter in air freight?

At 1:6000, one cubic meter equals 166.67 kg, normally rounded to 167 kg.

What do the 139 and 166 divisors mean?

They are US divisors in cubic inches per pound. 139 is roughly the imperial equivalent of 5,000 cm³ per kg and 166 roughly the equivalent of 6,000 cm³ per kg.

How do I measure an irregular piece?

Take the maximum length, width and height as if the piece sat inside a rectangular box, including the pallet and any overhang.